|
A & J Crafts Enter content here |
|
Puzzle Rocker Instructions
Enter content here |
|
Instructions for Puzzle Rocking Chair (for parents) 1. Lay all six pieces out on the floor. 2. Pick up the two large side pieces and the main
back piece. 3. Fit the
three pieces together with the slots provided (it does not make any difference which is right or left or front and back). 4. Pick up the front cross brace and attach it
to the two side pieces, (you might have to tilt the cross brace forward a little to get it to slide in the notches). 5. Pick up the seat and slide it into place.
First, it will go into the horizontal slots in the side pieces and into the horizontal slot in the main back piece. 6. Take the smallest piece, which is the key,
and drop it into the back of the seat. 7. If you have any pieces left over - - - start from step #1 and try again. 8. Happy
rocking. Special Notes: If for some reason the slots get a little tight, just use some polish and they will work
just fine.
If you need to touch up the paint, I used spray paint from Rust-Oleum called "Painter's Touch" (from Home Depot
or Menards).
Enter content here Enter supporting content here |
||||
 |
||||